Overhead Joint Enclosures
Feature:
1. The design receives productively practical patents and keeps the box under sustainable seal performance in regular operations.
2. The port of alternating cable adopts spinning mechanical seal
3. The port of uncut cable adopts nonstop pressure mechanical seal.
4. It applies to the seal demand of Φ10~17.5 cable.
http://www.spiktel.com/fiber-joint-enclosures.phphttp://www.spiktel.com/fiber-joint-enclosures.php
Send Query: sales@spiktel.com
|
Spiktel is a name synonymous with the Telecom Infrastructure industry, was established with a vision to obtain ultimate perfection and quality in network construction and manufacturing and trading of Electronics and Telecommunication products. Spiktel is growing its expertise to develop products for next generation networks which will provide ease for various applications like voice-over-IP (VoIP), video streaming (IPTV, video calls, etc.), peer-to-peer applications, etc.
Friday, September 12, 2014
Overhead Joint Enclosures
Hybrid OFC Cables
Hybrid OFC Cables
This cable is rated OFNR Riser and suitable for indoor/outdoor applications. It is perfect for installation in conduits between buildings and run directly through risers to a convenient network or splicing closet without a separate point of splice at building entrance. And it offers the benefit of installing multimode and single mode fibers all in one pull. It is also perfect for any indoor applications. This cable contains 4 9/125um single mode fibers and 4 62.5/125um multi-mode fibers.
http://www.spiktel.com/ofnr_riser.phphttp://www.spiktel.com/ofnr_riser.php Send Query: sales@spiktel.com http://www.spiktel.com/ofnr_riser.php |
Rack Mount Chasis
Rack Mount Chasis Spiktel's Rack Mount Chasis can support 16 function card and 2 power supply card. ST 2001 FA full configuration: 1 SNMP card, 15 (or 16) function card and 2power supply module (1 redundant module) Supports Spiktel complete protocol converter series, fiber modem series , 4E1 fiber optical Multiplexers series. Centralized SNMP rack mount solution allows network operator efficiently use expensive collocation place in racks, monitor network and deploy efficient fiber point-to-multipoint systems for access networks. http://www.spiktel.com/rack_mount_chasis.phphttp://www.spiktel.com/rack_mount_chasis.php Send Query :- sales@spiktel.com |
FXS/FXO Fiber Mux
FXS/FXO Fiber Mux AN-FM-PCM30 fiber Multiplexers can provide 1-8 channels, 1-16 channels, 1-24 channels, or 1-30 channels telephone through optical cable, the network application is point-to-point, supporting FXO/FXS. It has solved telephone transmission problem of edge customers. This equipment uses special digital multiple-connected chip whose function is formidable, and it integrates nearly all the digital logical function of equipment, thus remarkably enhancing product performance and reducing cost. http://www.spiktel.com/fxo-fxs-pdh-fiber-multiplexers.phphttp://www.spiktel.com/fxo-fxs-pdh-fiber-multiplexers.php Send Query: sales@spiktel.com |
3M Hot Melt Connector Termination Tool Kits
3M Hot Melt Connector Termination Tool Kits 3m Hot Melt Connector Termination Tool Kit with 6 Port Hot Melt Oven 220V, 3M Universal Holding Clips, Universal Polish Disc, Carbide Scribe, 200X Microscope, 1.25 mm Adapter Scope, Soft Polish Pad, Glass Polish Plate, Universal Connector Crimp Tool, 3M 2um Film, 3M 0.05um Single Mode Polish Disc http://www.spiktel.com/3m-hotmelt-mechanical-splice-tool-kit.phphttp://www.spiktel.com/3m-hotmelt-mechanical-splice-tool-kit.php Send Query:- sales@spiktel.com |
CATV OFC
CATV OFCProduct DetailCATV (cable television) systems support multiple services including broadcast television, on-demand entertainment (video), and high speed internet access. These services are supplied via a fiber optic network to an optical node, which converts and distributes the electrical signal to subscribers via a coaxial cable connection. Most CATV applications will utilize both single mode and multimode signals within different areas of the network. Single Mode fiber is used to distribute signal from the central office to optical nodes, where it can be converted to multimode.http://www.spiktel.com/catv_ofc.php Send Query: sales@spiktel.com |
Figure8 OFC / Aerial
Figure8 OFC / AerialProduct DetailAreal Cables are easy to install and reduce both the installation time and cost considerably. Theses cables are well adapted to a temperature range ranging anywhere between 55 to 85 degree Celsius, and can be easily separated from the fiber and the messenger. Some additional Configurations are also available for specific uses.http://www.spiktel.com/underground_ofc.phphttp://www.spiktel.com/underground_ofc.php Send Query: sales@spitel.com |
Interconnect Cables
Interconnect CablesProduct DetailSpiktel Cable Systems SST-Drop Dielectric Cables provide the simple installation of standard ALTOS Cable with an easy-access, single-tube design. Intended for FTTH networks, bridging the space between distribution network and subscriber premise.The small, lightweight cables offer exceptional crush resistance and handle a wide range of temperatures. Compatible with industry-standard hardware and available in preconnectorized assemblies. SST-Drop Cables are the perfect solution for drop applications. A drop cable access tool is also available, making installations faster, safer and easier.http://www.spiktel.com/interconnect.phphttp://www.spiktel.com/interconnect.php Send Query: sales@spiktel.com |
Bare Optical Fiber Cable
Bare Optical Fiber Cable Spiktel optical fiber is an evolutionary product that builds on over 15 years of proven performance from SMF–01 optical fiber. It addresses the transmission potential of full spectrum, optical transmission by eliminating high attenuation in and around the water-peak region (1360 nm – 1460 nm). SMF–01 fiber is compliant with the new International Telecommunication Union (ITU) standards for low water-peak fibers, ITU G.652.C, as well as Telecommunications Industry Association and Electronic Industries Alliance (TIA/EIA) standards. http://www.spiktel.com/bare_cables.phphttp://www.spiktel.com/bare_cables.php Send Query: sales@spiktel.com |
Hybrid OFC Cables
Hybrid OFC Cables
This cable is rated OFNR Riser and suitable for indoor/outdoor applications. It is perfect for installation in conduits between buildings and run directly through risers to a convenient network or splicing closet without a separate point of splice at building entrance. And it offers the benefit of installing multimode and single mode fibers all in one pull. It is also perfect for any indoor applications. This cable contains 4 9/125um single mode fibers and 4 62.5/125um multi-mode fibers.
http://www.spiktel.com/ofnr_riser.phphttp://www.spiktel.com/ofnr_riser.php Send Query: sales@spiktel.com |
FXS/FXO Fiber Mux
FXS/FXO Fiber Mux AN-FM-PCM30 fiber Multiplexers can provide 1-8 channels, 1-16 channels, 1-24 channels, or 1-30 channels telephone through optical cable, the network application is point-to-point, supporting FXO/FXS. It has solved telephone transmission problem of edge customers. This equipment uses special digital multiple-connected chip whose function is formidable, and it integrates nearly all the digital logical function of equipment, thus remarkably enhancing product performance and reducing cost. http://www.spiktel.com/fxo-fxs-pdh-fiber-multiplexers.phphttp://www.spiktel.com/fxo-fxs-pdh-fiber-multiplexers.php Send Query: sales@spiktel.com |
Labels:
FXS/FXO Fiber Mux
Location:
New Delhi, Delhi 110007, India
Passive Products
Passive Products |
If you are looking for ACTIVE AND PASSIVE PRODUCTS IN INDIA then spiktel is the right choice to do so. Passive optical components significantly reduce costs in the network by eliminating the need to power and service active components. They also expand the capacity of the existing fiber network. SPIKTEL’s components include RFoG WDM, CDWM, DWDM, optical splitters and optical couplers. SPIKTEL is a leader in manufacturing of terminated optical product, and more importantly, our team of engineers and technicians provide you with real-world, hands-on experience to build products that answer the challenges of your business and your network. http://www.spiktel.com/fiber-active-passive-profucts.phphttp://www.spiktel.com/fiber-active-passive-profucts.php Send Query : sales@spiktel.com |
Adss Cable Installation
Adss Cable Installation ADSS has a long history of successful installations in a variety of challenging climates. This aerial fiber optic cable contains no metallic components nor does it require support elements or earth bonding when installed. This results in improved safety and simplified installations for high and medium voltage transmission line circuits with span lengths from a few hundred feet to several thousand feet. So spiktel has been providing ADSS CABLE FITTINGS AND JOINTING KITS IN INDIA. http://www.spiktel.com/adss_ofc.phphttp://www.spiktel.com/adss_ofc.php Send Query: sales@spiktel.com |
Subscribe to:
Posts (Atom)